Üye *
Kayıt Tarihi: 08-24-2020
Doğum Tarihi: Belirtilmemiş
Zaman: 11-24-2020 12:33 PM
Statü: Çevrimdışı

ravenaud Forum Bilgisi
08-24-2020, 10:52 AM
0 (Günlük ortalama 0 mesaj
Toplam mesajların 100de 0)
(Tüm Mesajları Bul)
0 (Günlük ortalama 0 konu
Toplam konuların 100de 0)
(Tüm Konuları Bul)
1 Dakika, 35 Saniye
0 [Detaylar]
ravenaud Hakkında Ek Bilgi
1. Benefits
● Fast and easy to use, saving labour and time
● Press has a high quality O-Ring material that forms a secure leak free joint when pressed
● Permanent connections
● Size range from 1/2" to 2"
● Press fittings and press tools are compatible with various press tools and jaws
● Meet requirements of NSF61 (products in contact with drinking water) and NSF 372 (low lead requirements)
● Environmentally friendly system
2.Product Specification:
Item No. ID Material Certification Pcs/bag
70220400 3/4"
C46500/ C69300 UPC
NSF/ANSI 372 1
3.EPDM sealing element:
Operating temperature: 0°F to 250°F (-18°C to 120°C)
The EPDM sealing element has particularly good resistance to hot water, making it ideal for seals and gaskets in heating systems, fittings and household application (e.g. washing machines, pumps, dishwashers).

4.1/2" to 2" Installation:
1.Cut copper tube to length using a pipe cutter.
2.Deburr carefully the end of the tube on the inside to minimize turbulence and pressure loss.
3.For existing copper tube, clean the end with emery paper or a soft scourer.
4.Make the insertion depth by lining up the fitting side by side with the tube and mark the tube. When the fitting is inserted onto the tube the outer edge of the fitting must line up with the marking.
5.Select pressing jaw according to the fitting dimension and insert into the pressing machine. Arrest the locking bolts of the machine. Check the jaws are free from debris and in good working order.
6.Ensure you have the correct fitting for the application (e.g. water or gas). Check the fitting is clean and the O-ring is free from debris and correctly sitting in place. Push fitting on tube all the way to the engagement marking.
7.Check the fitting outer edge still lines up with the marking. Open the pressing jaw and close it around the fitting so the raised bump in the fitting rests inside the groove of the pressing jaw.
8.Initiate the pressing job by pressing the start button. The automatic pressing process guarantees a tight connection. The pressing process can be interrupted by pressing the emergency-stop button.
9.Visually inspect the fitting to ensure the press has been completed.
5. Pressing tool and jaws:
6. Recommendations:
Fada Lead-free Brass Press 90°Elbow, P x FPT - 3/8"
Fada Lead-free Brass Press 90°Elbow, P x FPT - 1/2"
Fada Lead-free Brass Press Drop Ear 90°Elbow, P x FPT - 1/2"
7. Frequently Asked Questions:
Q: Can press fittings be placed in the ground
A: Yes, but the tube and fittings must be protected when installed in any corrosive and /or acidic environments, this includes possible ground water exposure, as per regulatory requirements.
Q: Can the Press Fittings be used with medical gases?
A: No, the fittings are not recommended for use with most medical gases.
Q: Can the press fittings be installed where the mains water line won"t shut off?
A: Yes, it can be used where the mains water line cannot be turned off. After pressing the press fitting, it will provide a watertight joint. As long as the O-ring has not been dislodged during installation uder pressure or movement there will be no problems; precautions to protect the pressing tool are also highly recommended.

8. About us:
With a thirty years history of supplying Brass & Bronze Fittings and Valves, Taizhou Bada Valve Co.,Ltd has presented leadership in Brass & Bronze Fittings and Valves Manufacturing Industry. To keep making progress everyday, we never stop asking “What makes us different?"
Because we"re dedicated to quality in everything that we do, it"s no surprise that we"ve been able to partner with industry associations of the highest standards. We use the finest raw materials available, put them through a thorough manufacturing process, and conduct r igorous testing to ensure that every product we provide is dependable, durable, and long-lasting.
9. Contact us:
Taizhou Bada Valves Co.,Ltd
Phone: +86-576-82686004
E-mail: sales6@badavalve.com
Address: Fengjiang, Luqiao, Taizhou, Zhejiang, 310854 P.R China
Office Hours: Monday through Saturday
Business: 8 a.m. to 5 p.m. Lead-free Brass Press Elbows suppliers
ravenaud üyesinin İletişim Detayları